|
 Pot-Perm
Water Treatment Chemical for Oxidation
& Disinfection
- Oxidizes Iron, Manganese and Hydrogen Sulfide for Effective
Filtration.
- Controls Taste and Odors through absorption of organics.
- Disinfects by destroying micro-organisms including coliform
bacteria and algae.
Meets NSF standard 60: Drinking water treatment chemicals
– Health effects.
Applications
Iron Filters
- Dissolve 10 ounces of Pot-Perm to 1 gallon of hot water.
Stir until completely dissolved. Mix
carefully, solution can cause stains.
- Use solution in accordance with the instructions for your
iron filter.
NOTE: A recommended dose of 2-4 ounces of Pot-Perm solution
per cubic of manganese treated greensand or birm is suggested
for regeneration.
Chemical Feed Pumps
A Solution of 1/4 pound of Pot-Perm per 1 gallon of warm water
will yield 30,000 PPM of solution.
Dosage requirements in most cases is 1 PPM of Pot-Perm per
each PPM of either iron, manganese, or
hydrogen sulfide
Ordering information:
|
Mfg.#
|
Size
|
Pack
|
|
3404070
|
3 lb. |
4/case |
|
3404050
|
5 lb. |
4/case |
|
